Hi, I have ADT camera’s running on wifi. I have a concern that my neighbor has found a way to hack into the camera’s control system. I have experienced a few camera issues (ex. not picking up certain motion when people come out, as if the clips are being externally controlled from an outside source). I have tried changing my routers username, password, disabling the SSID broadcast, etc. However, it doesn’t seem to help. Is it possible that I can view CMD or use a certain software to determine if in fact my wifi/cameras have been hacked into?
Another way to get network info using powershell:
-> get-netadapter | select * (tells everything about the adapter)
-> get-netadapterstatistics (network stats)
-> get-netipaddress (gain ip address of network adapter)
-> get-netipconfiguration (same as ipconfig)
When i do the “net view” command I get “the servers for this workgroup is not currently available”. Is there a way to force it to show me what devices are connected to my network?
When I am in Skype meeting repetitively i am getting disconnected from Screen sharing and Presentation as well though I have good network connection having Speed of 98 Mbps of download Speed and 24 Mbps of Upload Speed. So, need to know is there any other parameter which can be causing this issue. Also please suggest me how can i resolve my issue.
My wi fi westell -750 router is connecting to internet but nit conneclng to my android mobile.
From my mobile seyttngs when I enter the passwword wi fi shows as connected. but I find the mobile is not connected to internet. please guide.
hello thank you very the very great article i have read it and its very helpful .
just two questions i want my smartphone to get access to my WIFI network which it had initially been locked out.secondly i eager to be receiving ayour tutorials as soon as possible.
Thank you very much for the very good job.
First of all thank, can you tell me why my computer cannot use command 1, “connection” 2, “cd aircrack-ng”. my computer is window 7.
Pls sent me a reply.
i love the page. thank you very much. can you please send me tutorials from time to time?
i love computers and want to know as much about them as possible.
especially programming, networking and securities.
32 Responses to “Command Prompt (CMD): 10 network-related commands you should know”
Very insightful
Please include powershell commands to troubleshoot wifi and network issues.
Hi, I have ADT camera’s running on wifi. I have a concern that my neighbor has found a way to hack into the camera’s control system. I have experienced a few camera issues (ex. not picking up certain motion when people come out, as if the clips are being externally controlled from an outside source). I have tried changing my routers username, password, disabling the SSID broadcast, etc. However, it doesn’t seem to help. Is it possible that I can view CMD or use a certain software to determine if in fact my wifi/cameras have been hacked into?
Change your Wi-Fi password, reset your cameras and reconfigure them with a different access password. It should do the trick.
netstat -b -o -a -r -n
This gives you the jason bourne identity.
Very helpful
Another way to get network info using powershell:
-> get-netadapter | select * (tells everything about the adapter)
-> get-netadapterstatistics (network stats)
-> get-netipaddress (gain ip address of network adapter)
-> get-netipconfiguration (same as ipconfig)
Todd
Thanks for sharing this information.
can we connect notwork computers through cmd command. please mentioned the necessary command/code for that.
Thanks!
How can i access devices like UPSs and Rectifiers on network. Off course with IP addresses
When i do the “net view” command I get “the servers for this workgroup is not currently available”. Is there a way to force it to show me what devices are connected to my network?
In CMD prompt, type—–> netstat press enter
It is very helpful for me as a beginner
dear sir i want know about which is shown in a netstat command
When I am in Skype meeting repetitively i am getting disconnected from Screen sharing and Presentation as well though I have good network connection having Speed of 98 Mbps of download Speed and 24 Mbps of Upload Speed. So, need to know is there any other parameter which can be causing this issue. Also please suggest me how can i resolve my issue.
Code is our knowledge. I mean cmd codes are the degree of our knowledge about the computer and its devices…
My wi fi westell -750 router is connecting to internet but nit conneclng to my android mobile.
From my mobile seyttngs when I enter the passwword wi fi shows as connected. but I find the mobile is not connected to internet. please guide.
i wanna name book for learning net command on cmd “dos ” please
How can use Cmd To Locate another PC or network
hello thank you very the very great article i have read it and its very helpful .
just two questions i want my smartphone to get access to my WIFI network which it had initially been locked out.secondly i eager to be receiving ayour tutorials as soon as possible.
Thank you very much for the very good job.
First of all thank, can you tell me why my computer cannot use command 1, “connection” 2, “cd aircrack-ng”. my computer is window 7.
Pls sent me a reply.
the commands are useful for a beginar but are common for a regular user ore a expert
Thanks a lot for reminding all of that
awsm commands
I am not getting any connection in cmd. so please share me about this.
normal commands that is widely available in website..why don’t give some powerful commands which can do lots of changes in a computer
Nice.& Thans
Good tutors, netstat actually helped me to find the radio stream that I wanted badly which web browsers failed to reveal!!
i love the page. thank you very much. can you please send me tutorials from time to time?
i love computers and want to know as much about them as possible.
especially programming, networking and securities.
Subscribe to our email newsletter, using this link: http://eepurl.com/f9Sqn
And you will receive an email every week with out tutorials and articles.
if there are some other commands means send it to my mail id pls thank you
thnx it was very usefull
Thanks alot